Tactile perception can be investigated through ex vivo friction measurements using a so-called ForceBoard™, providing objective assessments and savings in time and money, compared to a subjective human panel. In this work we aim to compare excised skin versus VitroSkin® as model substrates for tactile friction measurements. A further aim is to detect possible differences between traditional surfactant-based creams, and a particle-stabilized (Pickering) cream and investigate how the different substrates affect the results obtained. It was found that the difference in tactile friction between excised skin and VitroSkin® was small on untreated substrates. When topical creams were applied, the same trends were observed for both substrates, although the frictional variation over time relates to the difference in surface structure between the two substrates. The results also confirmed that there is a difference between starch-based Pickering formulations and surfactant-based creams after application, indicating that the latter is greasier than Pickering cream. It was also shown that the tactile friction of Pickering emulsions was consistently high even with high amounts of oil, indicating a non-greasy, and non-sticky formulation. The characteristics of starch-stabilized Pickering formulations make them promising candidates in the development of surfactant-free topical formulations with unique tactile properties.

Rising consumer demands for safer, more natural, and sustainable topical products have led to increased interest in finding alternative excipients, while retaining functionality and cosmetic appeal. Particle-stabilized Pickering creams have emerged as possible alternatives to replace traditional surfactant-stabilized creams and are thus one of the focuses in this study. The aim of this paper was to study relationships between sensorial characteristics and physical properties to understand how different excipients affect these aspects, comparing one starch particle–stabilized and three surfactant-stabilized formulations. A human panel was used to evaluate sensorial perception, while physical properties were deduced by rheology and tactile friction, together with in vivo and ex vivo skin hydration measurements.

The results show that sensorial attributes related to the application phase can be predicted with rheology, while afterfeel attributes can be predicted with tactile friction studies. Differences in rheological and sensory properties among surfactant-based creams could mainly be attributed to the type of emollients used, presence of thickeners and surfactant composition. Differences between surfactant-based creams and a Pickering cream were more evident in relation to the afterfeel perception. Presence of starch particles in the residual film on skin results in high tactile friction and low perception of residual coating, stickiness, greasiness, and slipperiness in sensorial afterfeel.

The aim of this study was to investigate the effect of various skin preservation protocols on in vitro drug permeation, epidermal-dermal drug distribution, and electrical impedance properties of skin membranes. Acyclovir (AC) and methyl salicylate (MS) were selected as model drugs due to their different physicochemical properties and skin metabolic profiles. In particular, AC is relatively hydrophilic (logP -1.8) and not expected to be affected by skin metabolism, while MS is relatively lipophilic (logP 2.5) and susceptible to metabolism, being a substrate for esterase residing in skin. Skin from pig ears was used and freshly excised into split-thickness membranes, which were divided and immediately stored at five different storage conditions: a) 4 °C overnight (fresh control), b) 4 °C for 4 days, c) and d) -20 °C for 6 weeks and one year, respectively, and e) -80 °C for 6 weeks. Based on the combined results, general trends are observed showing that fresh skin is associated with lower permeation of both model drugs and higher skin membrane electrical resistance, as compared to the other storage conditions. Interestingly, in the case of fresh skin, significantly lower amounts of MS are detected in the epidermis and dermis compartments, implying higher levels of ester hydrolysis of MS (i.e., higher esterase activity). In line with this, the concentration of salicylic acid (SA) extracted from the dermis is significantly higher for fresh skin, as compared to the other storage conditions. Nevertheless, for all storage conditions, substantial amounts of SA are detected in the receptor medium, as well as in the epidermis and dermis, implying that esterase activity is maintained to some extent in all cases. For AC, which is not expected to be affected by skin metabolism, freeze storage (protocols c-e) is observed to result in higher accumulation of AC in the epidermis, as compared to the case of fresh skin, while the AC concentration in dermis is unaffected. These observations can be rationalized primarily by the observed lower permeability of fresh skin towards this hydrophilic substance. Finally, a strong correlation between AC permeation and electrical skin resistance is shown for individual skin membranes irrespective of storage condition, while the corresponding correlation for MS is inferior. On the other hand, a strong correlation is shown for individual membranes between MS permeation and electrical skin capacitance, while a similar correlation for AC is lower. The observed correlations between drug permeability and electrical impedance open up for standardizing in vitro data for improved analysis and comparisons between permeability results obtained with skin stored at different conditions.

The present study describes the development of a microsphere capsule based on polylactide-co-glycolide (PLGA) loaded with simvastatin that was subsequently incorporated into synthetic bone cement. The osteogenic effect of simvastatin-loaded bone cement was in a critical sized defect in vivo to test the hypothesis the biologic response would be different depending on the dosage of simvastatin applied to bone cement. Our results showed that simvastatin loaded PLGA microspheres can be successfully obtained through O/W emulsion/solvent evaporation method with appropriate morphologic characteristics and high encapsulation efficiency for incorporation in bone cements. The biodegradable characteristic of the microspheres successfully presented a slow release and the duration of the release lasted for more than 1 month. The in vivo experiment revealed that the microspheres containing simvastatin significantly enhanced bone formation in the rabbit calvaria critical size defect.

Transdermal delivery of quercetin (QR, 3,30,40,5,7-pentahydroxyflavone), a natural flavonoid with a considerable antioxidant capacity, is important for medical treatment of, e.g., skin disorders. QR permeability through skin is low, which, at the same time, makes the monitoring of percutaneous QR penetration difficult. The objective of this study was to assess an electrochemical method for monitoring QR penetration through skin membranes. An electrode was covered with the membrane, exposed to QR solution, and electrode current was measured. The registered current was due to electro-oxidation of QR penetrating the membrane. Exploiting strict current-QR flux relationships diffusion coefficient, D, of QR in skin and dialysis membranes was calculated. The D values were strongly dependent on the theoretical model and parameters assumed in the processing of the amperometric data. The highest values of D were in the range of 1.6-6.1 x 10(-7) cm(2)/s. This was reached only for skin membranes pretreated with buffer-ethanol mixture for more than 24 h. QR solutions containing penetration enhancers, ethanol and L-menthol, definitely increased D values. The results demonstrate that electrochemical setup gives a possibility to assess penetration characteristics as well as enables monitoring of penetration dynamics, which is more difficult by traditional methods using Franz cells. (C) 2015 Elsevier B.V. All rights reserved.

Cyclodextrins (CDs) and mesoporous silica particles (MSPs) have been combined as composite carriers for controlled antibiotic release. CDs were employed as "gatekeeper" agents and grafted onto MSPs to retain drug molecules inside the MSP carrier. A variety of CDs (unfunctionalized, positively charged and carboxymethylated) and three different coupling strategies (covalent binding, electrostatic adsorption and inclusion complexation) were systematically investigated for their ability to control the release of two antibiotic drugs, metronidazole and clofazimine. The drugs had significantly different physicochemical properties (metronidazole - small hydrophilic, clofazimine- large hydrophobic). We report for the first time on the encapsulation and characterization of metronidazole-loaded-MSP. Each CD coating strategy reduced the drug release rate in phosphate buffer compared to unmodified MSP (from 20% to 100% retained drug). Covalent binding and inclusion complex approaches were significantly more effective than electrostatically adsorbed CD. In particular, the novel inclusion complex based on host/guest interaction between benzyl-modified silica surface and alpha-CD proved to be very effective (60-100% retained drug amount). Using pharmaceutical manufacturing processes, our study shows that CD-MSP composites can retain both hydrophobic and hydrophilic antibiotic compounds with potential translation to triggered release formulation targeting bacterial infections in the colon and lower intestine.

Local irritation and inflammation at the site of administration are a common side effect following administration of parenteral formulations. Biological effects of surface (interfacial) activity in solutions are less well investigated than effects caused by other physico-chemical parameters such as pH and osmolality. The interfacial activity in different systems, including human plasma, typical amphiphilic substances with fundamental biological relevance such as free fatty acids, anesthetic depot formulations and six different antibiotics was measured. The relative interfacial pressure, and/or concentration of active substance, required to obtain 50% of the maximal attainable effect in terms of interfacial pressure were calculated. The aim was to test the hypothesis that these parameters would allow comparison to biological effects reported in in vivo studies on the investigated substances. The highest interfacial activity was found in a triglyceride/plasma system. Among the antibiotic tested, the highest interfacial activities were found in erythromycin and dicloxacillin, which is in accordance with previous clinical findings of a high tendency of infusion phlebitis and cell toxicity. Independently of investigated system, biological effects were minimal below a 15% relative increase of interfacial activity. Above 35-45% the effects were severe. Interfacial activity in parenteral formulations may well cause damages to tissues followed by inflammation. (C) 2015 Elsevier B. V. All rights reserved.

Migraine is a highly prevalent neurological disease affecting circa 1 billion patients worldwide with severe incapacitating symptoms, which significantly diminishes the quality of life. As self-medication practice, oral administration of triptans is the most common option, despite its relatively slow therapeutic onset and low drug bioavailability. To overcome these issues, here we present, to the best of our knowledge, the first study on the possibility of oral transmucosal delivery of one of the safest triptans, namely eletriptan hydrobromide (EB). Based on a comprehensive set of in vitro and ex vivo experiments, we highlight the conditions required for oral transmucosal delivery, potentially giving rise to similar, or even higher, drug plasma concentrations expected from conventional oral administration. With histology and tissue integrity studies, we conclude that EB neither induces morphological changes nor impairs the integrity of the mucosal barrier following 4 h of exposure. On a cellular level, EB is internalized in human oral keratinocytes within the first 5 min without inducing toxicity at the relevant concentrations for transmucosal delivery. Considering that the pKa of EB falls within the physiologically range, we systematically investigated the effect of pH on both solubility and transmucosal permeation. When the pH is increased from 6.8 to 10.4, the drug solubility decreases drastically from 14.7 to 0.07 mg/mL. At pH 6.8, EB gave rise to the highest drug flux and total permeated amount across mucosa, while at pH 10.4 EB shows greater permeability coefficient and thus higher ratio of permeated drug versus applied drug. Permeation experiments with model membranes confirmed the pH dependent permeation profile of EB. The distribution of EB in different cellular compartments of keratinocytes is pH dependent. In brief, high drug ionization leads to higher association with the cell membrane, suggesting ionic interactions between EB and the phospholipid head groups. Moreover, we show that the chemical permeation enhancer DMSO can be used to enhance the drug permeation significantly (i.e., 12 to 36-fold increase). Taken together, this study presents important findings on transmucosal delivery of eletriptan via the oral cavity and paves the way for clinical investigations for a fast and safe migraine treatment.

When applied to skin, particulate matter has been shown to accumulate in hair follicles. In addition to follicles, the skin topography also incorporates trench-like furrows where particles potentially can accumulate; however, the furrows have not been as thoroughly investigated in a drug delivery perspective. Depending on body site, the combined follicle orifices cover up to 10% of the skin surface, while furrows can easily cover 20%, reaching depths exceeding 25 µm. Hence, porous particles of appropriate size and porosity could serve as carriers for drugs to be released in the follicles prior to local or systemic absorption. In this paper, we combine multiphoton microscopy, scanning electron microscopy, and Franz cell diffusion technology to investigate ex-vivo skin accumulation of mesoporous silica particles (average size of 400-600 nm, 2, and 7 µm, respectively), and the potential of which as vehicles for topical drug delivery of the broad-spectrum antibiotic metronidazole. We detected smaller particles (400-600 nm) in furrows at depths of about 25 µm, also after rinsing, while larger particles (7 µm) where located more superficially on the skin. This implies that appropriately sized porous particles may serve as valuable excipients in optimizing bioavailability of topical formulations. This work highlights the potential of skin furrows for topical drug delivery.