Återvinning av kolfiberförstärkta kompositer (CFRP) med perättiksyra assisterad med mikrovågsuppvärmning
2026 (Swedish)Independent thesis Basic level (university diploma), 10 credits / 15 HE credits
Student thesisAlternative title
Recycling of carbon fiber reinforced composites (CFRP) with peracetic acid assisted by microwave heating (English)
Abstract [sv]
Den ökande användningen av kolfiberförstärkta kompositer (CFRP) inom flyg-,fordon- och energiindustrin har ökat behovet av effektiva återvinningsmetoder.Härdplaster såsom epoxi kan inte smältas om, det vill säga att det krävs metodersom frigör fibrerna från polymermatrisen utan att försämra fibrernas egenskaper.Examensarbetets syfte var att validera och vidareutveckla ett tidigare examensarbete som studerade kemisk återvinning av kolfibrerna i CFRP med perättiksyramed assistans från mikrovågsstrålning. Arbetets fokus var på att ta fram konsekventa provdimensioner, fastställa ett intervall för exponeringstider samt attutvärdera resultatens tillförlitlighet med hjälp av statistisk analys.
CFRP-proverna kommer från ett vindkraftverksblad. Alla prover kapas till dimensionerna 60 × 3 × 1, 5 mm som sedan läggs i perättiksyra i en rundkolv som sedanexponeras för mikrovågor under olika tider mellan 180 och 300 min. När perättiksyran reagerar med CFRP degraderar (bryter ner) perättiksyran epoxi matrisendär mikrovågsstrålning assisterar processen vilket minskar den nödvändiga exponeringstiden. 31 experiment utfördes där degraderingen bestämdes huvudsakligengenom gravimetri. Svepelektronmikroskopi (SEM) användes för att undersöka variationer i degraderingen för intressanta prover. Dessutom valdes två prover föratt analyseras med termogravimetrisk analys (TGA) för att undersöka mängdenkvarvarande epoxi men även för att bekräfta materialsammansättningen.
Resultaten visade att degradationsgraden ökade med ökande exponeringstid ochatt den högsta genomsnittliga degraderingen uppnåddes efter 300 min, där denuppgick till 94 %. Förberedandet av provdimensionerna resulterade i en standardavvikelse på 0,036 mm för längden, 0,027 mm för bredden och 0,019 mm förtjockleken. Detta bidrog till en hög jämförbarhet mellan proverna. Den statistiskaanalysen visade samtidigt att det förekom variationer mellan proverna, vilket tyder på att processen ännu inte är helt reproducerbar. SEM-analyserna visade attdegraderingen kunde ske på två olika sätt: antingen jämnt över hela provet vilketlämnar en spröd zon eller lokalt, vilket ofta lämnar en solid kärna av kvarvarandehärdplast. TGA-analysen bekräftade materialsammansättningen från handledarenoch att härdplastmatrisen inte bryts ned fullständigt i prover med en solid kärna,trots längre exponeringstider.
Examensarbetet visar att metoden har potential att effektivt återvinna CFRP ochkan uppnå en hög degradering. Samtidigt visar resultaten att det inte är endastexponeringstiden som avgör degradationsgraden. För att säkerställa att processenär reproducerbar och att degraderingen är fullständig så krävs fortsatta studier avytterligare parametrar.
Abstract [en]
The increasing use of carbon fiber reinforced composites (CFRP) in the aerospace,automotive and energy industries has increased the need for effective recyclingmethods. Thermosetting plastics such as epoxy cannot be remelted, which meansthat methods are required that release the fibers from the polymer matrix withoutdegrading the properties of the fibers. The purpose of the thesis was to validate andfurther develop a previous thesis that studied chemical recycling of carbon fibersin CFRP with peracetic acid with assistance from microwave radiation. The focusof the work was to develop consistent sample dimensions, determine a range ofexposure times and evaluate the reliability of the results using statistical analysis.
The CFRP samples come from a wind turbine blade. All samples are cut to dimensions 60 × 3 × 1.5 mm which are then placed in peracetic acid in a roundbottomed flask which is then exposed to microwaves for various times between180 and 300 min. When the peracetic acid reacts with the CFRP, the peraceticacid degrades (breaks down) the epoxy matrix where microwave radiation assiststhe process which reduces the necessary exposure time. 31 experiments were performed where the degradation was determined mainly by gravimetry. Scanningelectron microscopy (SEM) was used to investigate variations in the degradationfor interesting samples. In addition, two samples were selected to be analyzed bythermogravimetric analysis (TGA) to investigate the amount of remaining epoxybut also to confirm the material composition.
The results showed that the degree of degradation increased with increasing exposure time and that the highest average degradation was reached after 300 min,where it amounted to 94 %. The preparation of the sample dimensions resultedin a standard deviation of 0.036 mm for the length, 0.027 mm for the width and0.019 mm for the thickness. This contributed to a high comparability between thesamples. The statistical analysis also showed that there were variations betweenthe samples, which indicates that the process is not yet fully reproducible. TheSEM analyses showed that the degradation could occur in two different ways: eitherevenly over the entire sample, leaving a brittle zone, or locally, often leaving a solidcore of residual thermoset. The TGA analysis confirmed the material compositionfrom the supervisor and that the thermoset matrix does not degrade completelyin samples with a solid core, despite longer exposure times.
The thesis shows that the method has the potential to effectively recycle CFRPand can achieve a high degradation. At the same time, the results show that it isnot only the exposure time that determines the degree of degradation. To ensurethat the process is reproducible and that the degradation is complete, furtherstudies of additional parameters are required.
Place, publisher, year, edition, pages
2026. , p. 48
Keywords [sv]
Kolfiberförstärkta kompositer, SEM, TGA, Materialteknik, Återvinning
National Category
Materials Engineering
Identifiers
URN: urn:nbn:se:mau:diva-88499OAI: oai:DiVA.org:mau-88499DiVA, id: diva2:2108000
Educational program
TS Maskin- och materialteknik
Presentation
2026-05-20, Malmö, 11:10 (Swedish)
Supervisors
Examiners
2026-10-062026-10-052026-10-06Bibliographically approved