IDA Klimat och Energi - Ett lämpligt och användbart alternativ för noggrannare energiberäkningar på VVS GRUPPEN AB?
2007 (Swedish)Independent thesis Basic level (professional degree), 10 credits / 15 HE credits
Student thesis
Abstract [sv]
I juli 2006 trädde BBR:s nya krav om byggnaders energiförbrukning ikraft, vilka jämfört med
de tidigare kraven väntas medföra förändringar för hela byggprocessen vad gäller hanteringen
av energifrågor. De hårdare kraven kommer bland annat i skepnad av ett nytt begrepp,
”byggnadens specifika energianvändning”, ett begrepp som med stor förmodan kommer att
ställa både högre krav på utförande av energiberäkningar i ett tidigare skede av
byggprocessen samt med större noggrannhet.
På VVS GRUPPEN AB i Lund utför man egna grövre energiberäkningar i samband med
projektering i ett ganska tidigt skede av processen, främst beräkningar för hand, för att i ett
senare skede låta en byggnadskonstruktör genomföra mer ingående energiberäkningar. Med
de nya hårdare kraven uppstår ett eventuellt behov av att framöver utföra egna
energiberäkningar på en noggrannare nivå redan i ett tidigare skede. BBR anger inga krav om
metod för beräkningarna, utan lämnar upp till var och en att välja lämplig metod för aktuellt
projekt.
I samarbete med VVS GRUPPEN utfördes därför en undersökning av en alternativ metod,
energiberäkning med hjälp av simuleringsprogrammet IDA Indoor Climate and Energy.
Undersökningen begränsades till ett pågående projekt i form av en ny biblioteksbyggnad i
Lomma, samt till att huvudsakligen syfta till beräkning av den specifika energin. Parallellt
med datasimuleringen utfördes enklare beräkningar för hand, för att kunna jämföra både
metod och resultat.
Syftet med arbetet bestod av att undersöka om IDA klimat och Energi skulle kunna vara ett
lämpligt och användbart alternativ, framförallt vad gäller VVS GRUPPENs intressen, för
noggrannare energiberäkningar i stället för den nuvarande kombinationen av handräkningar
och enklare beräkningsprogram. Målet var att få en bra första uppfattning om hur användbart
programmet skulle kunna vara för VVS GRUPPEN med avseende på beräkning av den
specifika energin.
Arbetet med IDA Klimat och Energi resulterade i uppfattningen att det skulle kunna vara ett
användbart program på VVS GRUPPEN. Företagets objektanpassade och okonventionella
lösningar talade till viss del emot användningen av ett så tidsödande program som IDA,
5
samtidigt som möjligheten till djupare undersökning och uppföljning av specifika faktorer
skulle kunna komma till stor nytta både för aktuellt projekt och för erfarenhetsåterföring.
Med anledning av företagets objektsanpassade och okonventionella lösningar skulle
användningen av programmet behöva kombineras med handräkningar och
erfarenhetsbedömningar. Detta delvis för att kunna förvissa sig om rimligheten i resultaten
men framförallt för korrigering av resultatet vid lösningar som inte går att återge mer än i
förenklad form på grund av programmets begränsningar. Förenklingar i simuleringsmodellen
skulle behöva kombineras med erfarenhetsbedömning och handräkning för korrigering av
eventuell inverkan på resultatet. Huruvida ett tidskrävande program som IDA Klimat och
Energi skulle visa sig tidsmässigt försvarbart i förhållande till de resultat man skulle uppnå
lämnades till vidare undersökning.
Abstract [en]
In July 2006 the Building Regulation’s new requirements for energy efficiency took effect,
which are expected to lead to changes in the entire building process in the matter of dealing
with energy efficiency and energy consumption. The new requirements introduced the
concept of “specific energy consumption”, a concept which is very likely to bring a future
need of energy calculations being carried out with greater accuracy at a much earlier stage of
the process.
”VVS GRUPPEN AB” in Lund carry out coarser energy calculations, mostly by hand, at a
quite early stage of the process, while more detailed calculations are left to be carried out by a
constructor at a latter stage. Considering the new, tougher requirements, it is probably only a
matter of time before the need of carrying out more detailed calculations earlier in the process
becomes obvious, which presumably will be followed by a need of other methods than
calculations by hand. As regards method, no requirements have been stated. The
responsibility of choosing a suitable method lies in the hands of each project.
In cooperation with VVS GRUPPEN, a study of one alternative method for more detailed
energy calculations was carried out. The method used was a computer–based simulation tool,
“IDA Indoor Climate and Energy 3.0”. In order to be able to compare the simulations with
the current method used at the company, coarser calculations by hand, comparable to the
company’s, were carried out. The investigation was restricted to calculation of the specific
energy consumption and also to one specific project, a new library-building in a small town
called Lomma.
The purpose of the study was to investigate whether IDA indoor Climate and Energy could
be a useful and suitable method, as regards the interests of VVS GRUPPEN, for carrying out
more detailed calculations at the early stage of the process instead of the current method of
combining courser calculations by hand with simpler computer-based calculations. The
object of the study was to form an opinion of how useful IDA indoor Climate and Energy
would be for VVS GRUPPEN, or a comparable company, when carrying out calculations of
specific energy consumption.
The research resulted in the opinion that IDA Indoor Climate and Energy could be a useful
tool at the company. The company’s object-suited and unconventional solutions do question
the use of such a time-consuming and demanding programme as IDA. At the same time IDA
creates great opportunities for further investigation of specific solutions as well as convenient
follow-ups, useful as regards both current project and documentation of experience for future
projects. The use of IDA at the company would, due to the object-suited and somewhat
unconventional solutions often created by he group, have to be combined with calculations by
hand as well as judgement based on experience. This both in order to being able to check the
credibility of the result and to correct the result in case of a created model where the technical
solution has had to be simplified. The question of whether the use of IDA at VVS GRUPPEN
would be appropriate or not considering the programme’s time-consuming qualities
combined with complicated and object-suited installations was left for further investigation to
decide.
Place, publisher, year, edition, pages
Malmö högskola/Teknik och samhälle , 2007.
Keywords [sv]
energiberäkning, IDA, Energi
National Category
Engineering and Technology
Identifiers
URN: urn:nbn:se:mau:diva-21857Local ID: 4998OAI: oai:DiVA.org:mau-21857DiVA, id: diva2:1481765
Educational program
KS US Byggdesign
2020-10-272020-10-272022-06-27Bibliographically approved