This study presents a comprehensive exploration of the electrochemical behavior of layer-by-layer assemblies comprising silver nanoparticles (AgNPs), poly-l-lysine (PLL), and bovine serum albumin (BSA) on gold surfaces. AgNPs were synthesized using the reduction of silver ions with the synergy of ascorbic acid and citrate in the presence of sodium chloride. The obtained silver nanoparticles were characterized using transmission electron microscopy, dynamic light scattering and UV-Vis spectroscopy. A typical preparation produced AgNPs with a plasmon peak at 402 nm, a diameter of 27.5 nm and zeta potential of -37 mV. Employing a drop-coating approach, we successfully achieved stable multilayers of AgNPs, PLL, and BSA. Cyclic voltammetry revealed well-defined, bell-shaped oxidation and reduction peaks of AgNPs within the multilayers, demonstrating complete conversion to AgCl and back to Ag. Notably, the stripping of AgNPs on a monolayer of PLL prepared at pH 4.00 resulted in the highest current intensity, contrasting with lower intensities observed for PLL monolayers prepared at pH 7.01 and pH 9.01. Despite the absence of a splitting reduction peak in the presence of biopolymer materials, a noteworthy observation emerged: the peak splitting exclusively occurred when PLL/AgNP layers, terminated with PLL, were exposed to BSA in the solution. image

HYPOTHESIS: Among other functions, mucins hydrate and protect biological interfaces from mechanical challenges. Mucins also attract interest as biocompatible coatings with excellent lubrication performance. Therefore, it is of high interest to understand the structural response of mucin films to mechanical challenges. We hypothesized that this could be done with Neutron Reflectometry using a novel sample environment where mechanical confinement is achieved by inflating a membrane against the films.

EXPERIMENTS: Oral MUC5B mucin films were investigated by Force Microscopy/Spectroscopy and Neutron Reflectometry both at solid-liquid interfaces and under mechanical confinement.

FINDINGS: NR indicated that MUC5B films were almost completely compressed and dehydrated when confined at 1 bar. This was supported by Force Microscopy/Spectroscopy investigations. Force Spectroscopy also indicated that MUC5B films could withstand mechanical confinement by means of steric interactions for pressures lower than ∼ 0.5 bar i.e., mucins could protect interfaces from mechanical challenges of this magnitude while keeping them hydrated. To investigate mucin films under these pressures by means of the employed sample environment for NR, further technological developments are needed. The most critical would be identifying or developing more flexible membranes that would still meet certain requirements like chemical homogeneity and very low roughness.

HYPOTHESIS: Salivary pellicles i.e., thin films formed upon selective adsorption of saliva, protect oral surfaces against chemical and mechanical insults. Pellicles are also excellent aqueous lubricants. It is generally accepted that reconstituted pellicles have a two-layer structure, where the outer layer is mainly composed of MUC5B mucins. We hypothesized that by comparing the effect of ionic strength on reconstituted pellicles and MUC5B films we could gain further insight into the pellicle structure.

EXPERIMENTS: Salivary pellicles and MUC5B films reconstituted on solid surfaces were investigated at different ionic strengths by Force Spectroscopy, Quartz Crystal Microbalance with Dissipation, Null Ellipsometry and Neutron Reflectometry.

FINDINGS: Our results support the two-layer structure for reconstituted salivary pellicles. The outer layer swelled when ionic strength decreased, indicating a weak polyelectrolyte behavior. While initially the MUC5B films exhibited a similar tendency, this was followed by a drastic collapse indicating an interaction between exposed hydrophobic domains. This suggests that mucins in the pellicle outer layer form complexes with other salivary components that prevent this interaction. Lowering ionic strength below physiological values also led to a partial removal of the pellicle inner layer. Overall, our results highlight the importance that the interactions of mucins with other pellicle components play on their structure.

Surfactants are important components of oral care products. Sodium dodecyl sulfate (SDS) is the most common because of its foaming properties, taste and low cost. However, the use of ionic surfactants, especially SDS, is related to several oral mucosa conditions. Thus, there is a high interest in using non-ionic and amphoteric surfactants as they are less irritant. To better understand the performance of these surfactants in oral care products, we investigated their interaction with salivary pellicles i.e., the proteinaceous films that cover surfaces exposed to saliva. Specifically, we focused on pentaethylene glycol monododecyl ether (C12E5) and cocamidopropyl betaine (CAPB) as model nonionic and amphoteric surfactants respectively, and investigated their interaction with reconstituted salivary pellicles with various surface techniques: Quartz Crystal Microbalance with Dissipation, Ellipsometry, Force Spectroscopy and Neutron Reflectometry. Both C12E5 and CAPB were gentler on pellicles than SDS, removing a lower amount. However, their interaction with pellicles differed. Our work indicates that CAPB would mainly interact with the mucin components of pellicles, leading to collapse and dehydration. In contrast, exposure to C12E5 had a minimal effect on the pellicles, mainly resulting in the replacement/solubilisation of some of the components anchoring pellicles to their substrate.

Increasing use of silver nanoparticles (AgNPs) in different consumer products provokes interest in understanding interactions of AgNPs with biological molecules, e.g., proteins. The adsorption of AgNPs and bovine serum albumin (BSA) onto self-assembled monolayer of mercaptohexylpyridinium (MHP) on gold surface is described. A quartz crystal microbalance coupled with electrochemical measurements are used to study interactions between AgNPs and BSA. It is found that AgNPs adsorbed on MHP can be considered as highly elastic (stiff) film as the dissipation Delta D approximate to 0. Measurements of the mass loss and the increase in dissipation in parallel with the electrochemical oxidation/reduction of AgNPs shows that albumin adsorption on AgNPs highly diminish electrochemical Ag/AgCl conversion. The formation of a less rigid Ag layer than the original MHP-AgNPs film is also indicated. The 3D assemblies of nanostructures observed with scanning electron microscopy (SEM) reveal clustering of particles after the redox process.

Enzymes have come into use for many new applications outside their natural biological environment, taking advantage of their high efficiency and selectivity as biocatalysts. Such new application often requires encapsulation to preserve the structure and activity of the enzyme, but also to regulate and control the activity. Here, we will discuss two types of encapsulation, soft matrices consisting of polar lipid liquid crystals and hard ordered mesoporous silica matrices. For both types of matrices, the challenge is to control the pore size of the matrices and the interaction with the matrix interface. Here, the polar lipid liquid crystals offer larger flexibility than silica, but on the other hand, it is considerably more sensitive to the environment.

In this work the impact of molecular inter-linker size on gold nanoparticle (AuNP) mono-/multilayer structural properties, density and homogeneity has been investigated. These characteristics are of great importance for functional binding of biomolecules. Positively charged high or low molecular weight inter-linkers, poly-L-lysine (PLL) or N-(6-mercapto)hexylpyridinium (MHP), were used to attach negatively charged AuNPs on a planar gold surface as well as to further interlink into a multilayer structure via layer-by-layer deposition. The inter-particle interaction within the assembled AuNP films was adjusted by the ionic strength in the AuNPs dispersions The AuNP layer density and structural/viscoelastic properties were evaluated by the quartz crystal microbalance with dissipation (QCM-D) technique. The validity of the commercial Voigt model, specifically developed for quantitative QCM-D data analysis of homogeneous viscoelastic films, was evaluated by a model independent analysis when comparing the assembled AuNP films with a homogeneous layer of a mucin from bovine submaxillary glands. Both AuNP mono- and multilayers, attached/interlinked via long flexible PLL molecules assembled to denser and more soft/viscous structures compared to those interlinked by short MHP compounds. Thus, PLL-interlinked AuNP mono-/multilayer structures were further investigated as a platform for laccase enzyme functional adsorption via qualitative assessment of bioelectrochemical characteristics of the enzyme. (C) 2019 Elsevier Inc. All rights reserved.

An important consequence of protein-lipid interaction is the effect on stability of the protein in solution as well as on its behavior at interfaces. Here we will discuss key aspects of protein aggregation and unfolding as well as the effects of protein structure (random coil proteins versus globular) that are relevant for our understanding protein-lipid interaction. The main types of emulsifiers are the (1) aqueous soluble, surfactant type and (2) lipids with low aqueous solubility. The monomer concentration as defined by cmc is an important parameter for the soluble lipids. For emulsifiers with low aqueous solubility the emulsifier self-assembly structure and its properties control the interaction with proteins. We will therefore summarize the main features of lipid self-assembly. It also allows us to define different plausible scenarios and principles and models for factors that control the interactions in real food (and Pharmaceutical) systems. For the food applications the fate of the lipid during digestion is important and therefore we will discuss some aspects of enzyme-catalyzed lipolysis in terms of the structural evolution. New products and concepts of using protein/emulsifier interactions will be exemplified by illustrating how food nanotechnology possibly can be used for the delivery of functionality.

Massive integration of biosensors into design of Internet-of-Things (IoT) is vital for progress of healthcare. However, the integration of biosensors is challenging due to limited availability of battery-less biosensor designs. In this work, a combination of nanomaterials for wireless sensing of biological redox reactions is described. The design exploits silver nanoparticles (AgNPs) as part of the RFID tag antenna. We demonstrate that a redox enzyme, particularly, horseradish peroxidase (HRP), can convert AgNPs into AgCl in the presence of its substrate, hydrogen peroxide. This strongly changes the impedance of the tag. The presented example exploits gold nanoparticle (AuNP)-assisted electron transfer (ET) between AgNPs and HRP. We show that AuNP is a vital intermediate for establishing rapid ET between the enzyme and AgNPs. As an example, battery-less biosensor-RFID tag designs for H2O2 and glucose are demonstrated. Similar battery-less sensors can be constructed to sense redox reactions catalysed by other oxidoreductase enzymes, their combinations, bacteria or other biological and even non-biological catalysts. In this work, a fast and general route for converting a high number of redox reaction based sensors into battery-less sensor-RFID tags is described.

Atherosclerosis is the main killer in the western world. Today's clinical markers include the total level of cholesterol and high-/low-density lipoproteins, which often fails to accurately predict the disease. The relationship between the lipid exchange capacity and lipoprotein structure should explain the extent by which they release or accept lipid cargo and should relate to the risk for developing atherosclerosis. Here, small-angle neutron scattering and tailored deuteration have been used to follow the molecular lipid exchange between human lipoprotein particles and cellular membrane mimics made of natural, "neutron invisible" phosphatidylcholines. We show that lipid exchange occurs via two different processes that include lipid transfer via collision and upon direct particle tethering to the membrane, and that high-density lipoprotein excels at exchanging the human-like unsaturated phosphatidylcholine. By mapping the specific lipid content and level of glycation/oxidation, the mode of action of specific lipoproteins can now be deciphered. This information can prove important for the development of improved diagnostic tools and in the treatment of atherosclerosis.