Objective: This study aimed at investigating implant survival rate and marginal bone loss (MBL) around extra-short implants. The impact of the loading protocol and of the use of an intermediate abutment was also evaluated, to explore possible differences in terms of the outcome measures.

Materials and methods: Patients with single or multiple mandibular or maxillary posterior edentulism rehabilitated using extra-short 5-6 mm long implants were included. Different prosthetic protocols were used. Clinical and radiological follow-up was 5 years. The outcomes measures were implant survival and MBL.

Results: The analysis included 56 implants placed in 34 adults (12 males and 22 females; mean age 60 years, SD 11). Six implants failed during a median follow-up of 5 years and 4 of them were recorded in one patient at 2-year follow-up. The 5-year implant survival was 89% overall (87% in conventional and 94% in immediate loading). At univariate analysis, during follow-up immediate loading was associated with higher MBL (mean variation 0.21 mm, 95%CI 0.01 to 0.40; p = 0.02), while intermediate abutment was associated with lower MBL (mean variation -0.23 mm, 95%CI -0.39 to -0.09; p = 0.003). Multivariable analysis confirmed that immediate loading was associated with higher MBL.

Conclusion: Within its limitations, this study showed that extra-short implants under immediate loading conditions can be a reliable solution. The application of horizontal and vertical platform switching with the use of intermediate abutments seems to be able to contribute to the reduction of MBL.

OBJECTIVES: Dental implant surgery relies extensively on bone drilling, a critical procedure with intrinsic challenges. Drill bits show significant wear and are frequently utilized beyond the manufacturer's recommended limits. Such practices can result in adverse effects, including friction and temperature rise in the surrounding bone area during interventions, with an increased risk of necrosis that can compromise the dental implant osseointegration. This study aimed to compare the quality of osteotomy obtained from two different protocols to determine a possible correlation between the drilling temperature and the tool wear and to evaluate their impact on potential health damage.

MATERIALS AND METHODS: Experimental evaluations were conducted using synthetic bone that reproduced human bone characteristics. The drilling phase involved real-time temperature acquisition and scanning electron microscopy analysis of tool wear evolution. After the operation, actual hole size and geometry were characterized using a coordinate measuring machine, and temperatures and torques were measured during the subsequent implantation phase.

RESULTS: The findings revealed a direct correlation between tool wear and the temperature rise during the drilling phase, while a lower correlation was found with the hole profile geometry variation. The implantation phase demonstrated temperature and torque values within acceptable ranges.

CONCLUSIONS: This study highlights the importance of adhering to proper tool maintenance and replacement protocols. By following recommended guidelines, practitioners can minimize adverse effects and enhance the success of dental implant procedures.

PURPOSE: There is no clinical consensus to determine the right balance between underpreparation and marginal bone level changes. The purpose of this systematic review and meta-regression was to investigate the influence of the type of drilling preparation of the implant site in relation to the bone mineral density on the clinical success, expressed in terms of the MBL and implant failure rate.

STUDY SELECTION: A thorough search was performed using the digital databases MEDLINE PubMed, EMBASE, and Cochrane Central Register of Controlled Trials by entering research lines or various combinations of free words. The main keywords used were "dental implants", "bone density", and "torque".

RESULTS: The mean bone resorption in the conventional preparation group was -0.43 (± 0.28) mm, whereas it was -0.80 (± 0.37) mm in the underprepared group. For the D1/D2/D3 bone group, the slope was significantly different from zero and linearity; the D4 bone group slope was not significantly different from zero and was almost parallel, although it was significantly different from linearity. The box and whiskers plot shows that the MBL in underprepared sites tended to be significantly higher with a higher variation than that in conventionally prepared sites.

CONCLUSION: Within its limits, our meta-regression analysis showed that MBL is influenced by the type of drilling preparation and bone mineral density. In particular, a lower MBL was observed in the D1 bone with conventional preparation than with underpreparation. Moreover, a greater implant-to-osteotomy site mismatch was positively associated with greater MBLs in the bone densities of D1/D2/D3.

PURPOSE: The aim of this study was to review the literature on current surface modification strategies used to improve the binding efficiency of an emerging biological material, polyetheretherketone (PEEK), with bone and soft tissues.

STUDY SELECTION: This review was based on articles retrieved from PubMed, Google Scholar, Web of Science, and ScienceDirect databases. The main keywords used during the search were "polyetheretherketone (PEEK)," "implant," "surface modification," "biomaterials," "bone," "osseointegration," and "soft tissue."

RESULTS: The suitability of PEEK surface modification strategies has been critically analyzed and summarized here. Many cell and in vivo experiments in small animals have shown that the use of advanced modification technologies with appropriate surface modification strategies can effectively improve the surface inertness of PEEK, thereby improving its binding efficiency with bone and soft tissues.

CONCLUSIONS: Surface modifications of PEEK have revealed new possibilities for implant treatment; however, most results are based on in vitro or short-term in vivo evaluations in small animals. To achieve a broad application of PEEK in the field of oral implantology, more in vivo experiments and long-term clinical evaluations are needed to investigate the effects of various surface modifications on the tissue integration ability of PEEK to develop an ideal implant material.

Purpose: To determine the biologic and biomechanical effects of two implant drilling protocols on the cortical bone around implants subjected to immediate loading. Materials and Methods: A total of 48 implants were inserted into the mandibles of six sheep following one of two drilling protocols: undersized preparation (US; n = 24) and nonundersized preparation (NUS; n = 24). Immediately after implant insertion, an abutment was placed on each implant and 36 implants were subjected to 10 sessions of dynamic vertical loads (1,500 cycles, 1 Hz) of 25 N or 50 N. Insertion torque value (ITV) was recorded at implant installation. Resonance frequency analysis (RFA) was measured at implant insertion and at each loading session. Fluorochrome was administered at day 17, and the animals were euthanized after 5 weeks. The removal torque values (RTVs) were measured, and samples underwent histomorphometric, mu CT (microcomputed tomography), and fluorescence image acquisition analyses. The bone volume density (BV/TV), bone-to-implant contact (BIC), bone area fraction occupancy (BAFO), and fluorochrome stained bone surface (MS) were calculated. A linear mixed model analysis was performed, and Pearson paired correlation was calculated. Results: Five implants from the NUS group failed, with a mean ITV of 8.8 Ncm and an RFA value of 57. The mean ITVs for US group and NUS group were 80.5 (+/- 14) Ncm and 45.9 (+/- 25) Ncm, respectively (P < .001). No differences were noted in the RFA values from the time of implant insertion until the end of the study. No differences in RTV, BV/TV, BAFO, or MS were observed between the groups. Intense new bone formation took place in the NUS group implants that were subjected to load. Conclusions: Undersized preparation of cortical bone ensured a greater BIC compared to a nonundersized preparation. Moreover, this study demonstrated that immediate loading did not interfere with the osseointegration process, but loading induced intense new bone formation in the NUS group. It is not recommended to immediately load the implants when the clinically perceived primary stability is lower than an ITV of 10 Ncm and an RFA value of 60.

OBJECTIVES: The aim of this study was to evaluate whether salivary contamination during placement of implants with different surface characteristics affects osseointegration in native and in augmented bone areas.

MATERIALS AND METHODS: Forty eight implants with machined surface (MS) and 48 implants with moderately rough surface (RS) were tested in the calvaria of 12 sheep. At the first surgery, 64 bony critical defects were randomly created and were subsequently augmented with two materials (autogenous or bovine bone). After 5 weeks of graft healing, 8 implants were placed per sheep, in native bone and in the centre of the augmented defects. Forty eight implants were soaked with saliva before placement (contaminated group [CG]), while 48 implants were not (non-contaminated group [NCG]). Five weeks after implant placement, bone-to-implant contact (BIC) and bone material area fraction occupancy (BMAFO) were calculated histomorphometrically.

RESULTS: Saliva contamination showed a significant negative effect (p = .000) on BIC, especially in augmented areas. RS showed significant positive effect on BIC, compared to MS (p = .000), while there were no significant differences for different bone conditions (p = .103). For BMAFO, the contamination showed a significantly negative affect (p = .000), while there were no significant differences for surface characteristics (p = .322) and for bone condition (p = .538).

CONCLUSION: Saliva contamination during dental implant placement has a negative effect on osseointegration in augmented areas. Moderately rough surface has a possible advantage in the aspect of initial bone to implant contact. However, it seems to be advisable to avoid saliva contamination especially for implants placed in augmented bone areas.

OBJECTIVES: This randomised controlled trial compares the 3-year outcomes, that is, marginal bone-level (MBL) changes and clinical parameters, between an abutment-level (AL) and implant-level (IL) connection for implants with an internal conical connection (ICC) supporting a screw-retained fixed partial denture.

MATERIAL AND METHODS: Fifty patients with 119 implants were randomly allocated to either the AL or IL group. Radiographic and clinical examinations were performed after one, two, and 3 years. A linear mixed model was used to evaluate the differences between groups.

RESULTS: The MBL change was not significantly different between the groups at any point. The MBL was 0.12 ± 0.31 mm (AL) and 0.23 ± 0.26 mm (IL) after 1 year; 0.15 ± 0.34 mm (AL) and 0.17 ± 0.22 mm (IL) after 2 years; 0.18 ± 0.39 mm (AL) and 0.15 ± 0.21 mm (IL) after 3 years. The bleeding on probing was 43.44 ± 39.24% (AL) and 58.19 ± 41.20% (IL) after 1 year; 35.78 ± 39.22% (AL) and 50.43 ± 41.49% (IL) after 2 years; 51.27 ± 44.63% (AL) and 49.57 ± 37.31% (IL) after 3 years and was significantly different (p = .025) between 1 and 2 years. The probing depth showed a significant difference at each time point while the plaque was not significant between the groups. The overall technical, biological and prosthetic complication rates were 5.04%, 3.36%, and 16.00%, respectively.

CONCLUSIONS: The MBL change was similar in the groups. The slight differences in the soft tissue complications between the groups are likely not of clinical relevance. An IL connection is considered to be a valid alternative to an AL set-up in ICC implants.

Implant therapy for tooth loss in the molar area is challenging due to the anatomical limitations, requiring bone augmentation procedures that are associated with high surgical complexity and long postsurgical recovery. Recently, many studies have demonstrated the usefulness of short implants. However, few studies have been performed in Japanese patients to evaluate peri-implant bone changes, changes in peri-implant epithelial tissue, and patient satisfaction. The present study included 16 patients (5 men, 11 women; mean age: 60 years) who received 26 short (6-mm) implants. Changes in peri-implant bone and epithelial tissue were measured radiographically at superstructure loading and after 2 years. Peri-implant pocket probing depth was measured at the epithelial tissue and compared at both time points. Patient satisfaction was graded using the Oral Health Impact Profile (OHIP-14) before treatment and at follow-up. The mean mesial and distal bone levels were -0.05 mm and 0.37 mm at loading, respectively, and were 0.33 mm and 0.53 mm after 2 years, respectively. Significant peri-implant bone formation for mesial and distal bone levels at both time points were determined by Wilcoxon signed-rank test. Mean probing depth increased slightly, from 3.03 mm at loading to 3.33 mm after 2 years, but no significant difference was found. The OHIP-14 found that patient satisfaction levels increased after 2 years. Using 6-mm short implants in sites with insufficient bone levels can be a highly beneficial treatment option for patients, as it avoids the need for bone augmentation. However, more long-term and detailed studies on the clinical outcomes for these implants are required. Int J Periodontics Restorative Dent 2022;42:205-213. doi: 10.11607/prd.5086

Bone overheating is a possible cause of implants early failure. When a surgical guide is used, the risk of heat injury is greater due to the reduced efficacy of the irrigation. The aim of this ex vivo study was to evaluate the effect of an additional built-in irrigation on bone temperature variation during implant osteotomy. Twelve bovine ribs were used. Cone beam computerized tomography (CBCT) was performed and a 3D-printed surgical guide with additional built-in irrigation tubes was produced for each rib. A total of 48 osteotomies were prepared, to compare the supplementary internal irrigation system (Group A) with external irrigation alone (Group B), no irrigation (Group C) and with free-hand surgery with external irrigation (Group D). Temperature was measured by three thermocouples placed at depths of 1.5, 7, and 12 mm. The largest temperature variation at each thermocouple showed median values of 3.0 degrees C, 1.9 degrees C, and 2.3 degrees C in Group 1; 2.3 degrees C, 1.7 degrees C, and 0.9 degrees C in Group 2; 3.2 degrees C, 1.6 degrees C, and 2.0 degrees C in Group 3; 2.0 degrees C, 2.0 degrees C, and 1.3 degrees C in Group 4, respectively. No differences were found among the four groups. In general, the highest temperature increase was observed with the use of the first drill (cortical perforator). Post-experimental CBCT revealed the presence of radiopaque material clogging the aperture of the internal irrigation channels. Additional internal irrigation was not found to significantly contribute to decrease bone temperature in this ex vivo setting.

OBJECTIVES: This RCT compares marginal bone level (MBL) change and the clinical parameters after a 3-year function in maxillary implant-supported fixed complete dentures (FCDs) treated with four-implants(4-I) or 6-implants(6-I).

MATERIAL AND METHOD: Three centres treated 56 patients with 280 implants allocated to the 4-I or 6-I group. Radiographic and clinical examinations were performed. The primary outcome was to investigate MBL change between the groups.

RESULTS: Implant survival rates were 100% and 99% in the 4-I and 6-I groups, respectively. Considering the clustering effects, the MBL change was not significantly different between the groups over the 3-year follow-up. The MBL in the 4-I group was 0.30±0.50mm at baseline, 0.24±0.31mm at 1-year and 0.24±0.38mm at 3-year. In the 6-I group, MBL was 0.14±0.32mm at baseline, 0.16±0.35mm at 1-year and 0.12±0.26 mm at 3-year. There was a statistically significant difference between the groups at BL and 3Y. No significant differences between the groups were reported for clinical parameters at each time point as well as in between the visits. The technical and biological complications rates were 1.6% and 6.0%, respectively. Prosthetic complications affected 25 FCDs (47.2%).

CONCLUSION: MBL change revealed a stable condition in the 3-year period in the two groups. Few technical and biological complications occurred apart from the chipping/fracture of the prosthetic teeth. Four-implant is a feasible solution if the rehabilitation is oriented towards the most cost-effective treatment and towards avoiding bone augmentation procedures. Clinicians have to consider the potential required visits for prosthetic maintenance.